Small Spot/Mark (Separate Amplifier) Extremely thin beam ideal for detection of minute objects and marks. Order Omron Automation and Safety E3C-VS1G (ZND) at DigiKey. Check stock and pricing, view product specifications, and order online. Omron E3C-VS1G Photoelectric Sensor 10mm for E3C Amplifier: : Industrial & Scientific.
|Published (Last):||24 June 2004|
|PDF File Size:||6.17 Mb|
|ePub File Size:||16.3 Mb|
|Price:||Free* [*Free Regsitration Required]|
The following are some examples of applications for which particular attention must be given. AC Two-wire Sensors Example: If the Sensor and the load are connected to separate power supplies, turn ON the Omrin power before omroj ON the load power. Optical energy does not e33c-vs1g as an ignition source, thus there is no danger of explosion or fire. Keep organic solvents away from the Sensor. If not grounded, switching noise in the power supply may cause malfunction.
Systems, e3c-vx1g, and equipment that could present a risk to life or property. This is because the Sensors may affect each other and cause output chattering even if separated by more than the Sensor sensing distance. Lowering the sensitivity will generally help. Through-beam Sensors Reflective Sensors 1 If Sensors are mounted in close proximity, use Sensors with the interference prevention function.
Cable Bending Destruction Test Tough Wire Breaking Test With current flowing, bending is e3c-va1g to check the number of bends until the current stops. Cable Tensile Strength When wiring the cable, do not subject the cable to a tension greater than that indicated in the following table.
Close mounting of Sensors is possible by alternating the Emitters with the Receivers in a zigzag fashion up to two Sensors. Although the bending repetition tolerance of a standard cable is approximately 13, times, robot cable has an excellent bending tolerance of approximatelytimes.
Placing them in the same conduit or duct may cause damage or malfunction due to induction interference. Repeated Bending Normally, the Sensor cable should not be bent repeatedly.
Omron E3c-vs1g E3CVS1G Photoelectric Sensor Switch
AC 2-wire Sensors Example: It is our practice to change model numbers when published ratings or features are changed, or when signi?
M8 and M12 Connectors? This may weaken performance. Values Given in Typical Examples The data and values given as typical examples are not ratings and performance and do not indicate specified performance. Insert a shield copper plate between the Sensor and the noise source e. Cable diameter Less than 4 mm 4 mm or greater Tensile strength 30 N max. Lens and Case The lens and case of the Photoelectric Sensor are primarily made of plastic. Exceptions are indicated in Safety Precautions in individual product information.
Light may enter even if the Sensors are separated by more than the sensing distance. Do not use it for such purposes. When in doubt, special model numbers may be assigned to?
EE11 Check the parallel movement distance range in the catalog, verify the set distance between adjacent Sensors, and install the Sensors accordingly at a distance at least 1. If the connector is not connected securely, the connector may be disconnected by vibration or the proper degree of protection of the Sensor may not be maintained. e3cv-s1g
Insert a capacitor e. Be sure to connect or disconnect the connector after turning OFF the Sensor. Typical measures are as given in the following table. Dirt should be gently wiped off with a dry cloth.
Omron E3CVS1G Photoelectric Sensor, 10 mm Reflective, NPN Output Buy from Cross
Do not subject a shielded cable or coaxial e3c-vs11g to tension. The following measures can be taken to avoid mutual interference. Countermeasure Concept Use a Sensor with the interference prevention function. Doing so may result in damage from burning and fire, particularly if the liquid is flammable.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Typical examples include the minimum sensing object, engineering data, step height detection data, and selection list for specifications. Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
However, if the workpieces are close to the Photoelectric Sensors, light from the adjacent Emitter may be received and cause the Sensor to e3c-vs1 to the incident light state. Use a soft, dry cloth to clean the Sensor.
OMRON E3C-VS1G Photoelectric sensor
Fiber insertion mark Fiber 9mm 2 Removing Fibers Open the protective cover, lift up the lock lever, and pull out the fibers.
Separation from High Voltage Wiring Method Do not lay the cables for the Sensor together with high-voltage lines or power lines. Precautions for Safe Use To ensure safety, always observe the following precautions. Radiant noise Ingress of high-frequency electromagnetic waves directly into Sensor, from power line, etc.
This omrpn is protected by copyright and is intended solely for use in conjunction with the product. Power Supply Types An unsmoothed full-wave or half-wave rectifying power supply cannot be used. Use the following methods to attach and remove Fiber Units.
Please d3c-vs1g us before copying or reproducing this catalog in any manner, for any other purpose. Please know and observe all prohibitions of use applicable to the products.
Mutual Interference Prevention Polarizing Filter: Be sure to insert a load when connecting the power supply. Doing so may cause explosion or burning.